Jump to content

Aluminium–air battery

From Wikipedia, the free encyclopedia
Aluminium–air battery
Specific energy1300 (practical), 6000/8000 (theoretical) W·h/kg[1]
Energy densityN/A
Specific power200 W/kg
Nominal cell voltage1.2 V

Aluminium–air batteries (Al–air batteries) produce electricity from the reaction of oxygen in the air with aluminium. They have one of the highest energy densities of all batteries, but they are not widely used because of problems with high anode cost and byproduct removal when using traditional electrolytes. This has restricted their use to mainly military applications. However, an electric vehicle with aluminium batteries has the potential for up to eight times the range of a lithium-ion battery with a significantly lower total weight.[1]

Aluminium–air batteries are primary cells, i.e., non-rechargeable. Once the aluminium anode is consumed by its reaction with atmospheric oxygen at a cathode immersed in a water-based electrolyte to form hydrated aluminium oxide, the battery will no longer produce electricity. However, it is possible to mechanically recharge the battery with new aluminium anodes made from recycling the hydrated aluminium oxide. Such recycling would be essential if aluminium–air batteries were to be widely adopted.

Aluminium-powered vehicles have been under discussion for some decades.[2] Hybridisation mitigates the costs, and in 1989 road tests of a hybridised aluminium–air/lead–acid battery in an electric vehicle were reported.[3] An aluminium-powered plug-in hybrid minivan was demonstrated in Ontario in 1990.[4]

In March 2013, Phinergy[5] released a video demonstration of an electric car using aluminium–air cells driven 330 km using a special cathode and potassium hydroxide.[6] On May 27, 2013, the Israeli channel 10 evening news broadcast showed a car with Phinergy battery in the back, claiming 2,000 kilometres (1,200 mi) range before replacement of the aluminium anodes is necessary.[7]

Electrochemistry

[edit]

The anode oxidation half-reaction is Al + 3OH
Al(OH)
3
+ 3e +2.31 V.

The cathode reduction half-reaction is O
2
+ 2H
2
O
+ 4e4OH
+0.40 V.

The total reaction is 4Al + 3O
2
+ 6H
2
O
4Al(OH)
3
+2.71 V.

About 1.2 volts potential difference is created by these reactions and is achievable in practice when potassium hydroxide is used as the electrolyte. Saltwater electrolyte achieves approximately 0.7 volts per cell.

The specific voltage of the cell can vary depending upon the composition of the electrolyte as well as the structure and materials of the cathode.

Other metals can be used in a similar way, such as lithium-air, zinc-air, manganese-air, and sodium-air, some with a higher energy density. However, aluminium is attractive as the most stable metal.[8]

Commercialization

[edit]

Issues

[edit]

Aluminium as a "fuel" for vehicles has been studied by Yang and Knickle.[1] In 2002, they concluded:

The Al/air battery system can generate enough energy and power for driving ranges and acceleration similar to gasoline powered cars...the cost of aluminium as an anode can be as low as US$ 1.1/kg as long as the reaction product is recycled. The total fuel efficiency during the cycle process in Al/air electric vehicles (EVs) can be 15% (present stage) or 20% (projected), comparable to that of internal combustion engine vehicles (ICEs) (13%). The design battery energy density is 1300 Wh/kg (present) or 2000 Wh/kg (projected). The cost of battery system chosen to evaluate is US$ 30/kW (present) or US$ 29/kW (projected). Al/air EVs life-cycle analysis was conducted and compared to lead/acid and nickel metal hydride (NiMH) EVs. Only the Al/air EVs can be projected to have a travel range comparable to ICEs. From this analysis, Al/air EVs are the most promising candidates compared to ICEs in terms of travel range, purchase price, fuel cost, and life-cycle cost.

Technical problems remain to be solved to make Al–air batteries suitable for electric vehicles. Anodes made of pure aluminium are corroded by the electrolyte, so the aluminium is usually alloyed with tin or other elements. The hydrated alumina that is created by the cell reaction forms a gel-like substance at the anode and reduces the electricity output. This is an issue being addressed in the development work on Al–air cells. For example, additives that form the alumina as a powder rather than a gel have been developed.

Modern air cathodes consist of a reactive layer of carbon with a nickel-grid current collector, a catalyst (e.g., cobalt), and a porous hydrophobic PTFE film that prevents electrolyte leakage. The oxygen in the air passes through the PTFE then reacts with the water to create hydroxide ions. These cathodes work well, but they can be expensive.

Traditional Al–air batteries had a limited shelf life,[9] because the aluminium reacted with the electrolyte and produced hydrogen when the battery was not in use; this is no longer the case with modern designs. The problem can be avoided by storing the electrolyte in a tank outside the battery and transferring it to the battery when it is required for use.

These batteries can be used as reserve batteries in telephone exchanges and as backup power sources.

Another problem is the cost of materials that need to be added to the battery to avoid power dropping. Aluminium is still very cheap compared to other elements used to build batteries. Aluminium costs $2.51 per kilogram while lithium and nickel cost $12.59 and $17.12 per kilogram respectively. However, one other element typically used in aluminium air as a catalyst in the cathode is silver, which costs about $922 per kilogram (2024 prices).[10]

Aluminium–air batteries may become an effective solution for marine applications due to their high energy density, low cost, and the abundance of aluminium, with no emissions at the point of use in boats and ships. AlumaPower,[11] Phinergy Marine,[12] Log 9 Materials, RiAlAiR[13] and several other commercial companies are working on commercial and military applications in the marine environment.

Research and development is taking place on alternative, safer, and higher performance electrolytes such as organic solvents and ionic liquids.[8] Others such as AlumaPower are focusing on mechanical methods to mitigate many of the historical issues with Al-air batteries. AlumaPower's patent (US US10978758B2 ) illustrates a method that rotates the anode which eliminates wear patterns and corrosion of the anode. The patent further claims that the design can use any scrap aluminium, including remelted soda cans and engine blocks.

See also

[edit]

References

[edit]
  1. ^ a b c Yang, S. (2002). "Design and analysis of aluminum/air battery system for electric vehicles". Journal of Power Sources. 112 (1): 162–201. Bibcode:2002JPS...112..162Y. doi:10.1016/S0378-7753(02)00370-1.
  2. ^ Fitzpatrick, N. P.; Smith, F.N.; Jeffrey, P. W. (1983). "The Aluminum-Air Battery". SAE Technical Paper Series. Vol. 1. Papers.sae.org. doi:10.4271/830290. Retrieved 2014-04-28.
  3. ^ Parish, D. W.; Fitzpatrick, N. P.; Callaghan, W. B. O'; Anderson, W. M. (1989). "Demonstration of Aluminum-Air Fuel Cells in a Road Vehicle". SAE Technical Paper Series. Vol. 1. Papers.sae.org. doi:10.4271/891690. Retrieved 2014-04-28.
  4. ^ Plug-in highway Archived 2013-10-29 at the Wayback Machine.
  5. ^ "Phinergy, Home". Phinergy.com. Retrieved 2014-04-29.
  6. ^ Phinergy corporate video on YouTube
  7. ^ Edelstein, Stephen. "Aluminum-Air Battery Developer Phinergy Partners With Alcoa". Greencarreports.com. Retrieved 2014-04-28.
  8. ^ a b Brown, Richard (3 February 2020). "Al-air: a better battery for EVs?". Automotive Logistics. Retrieved 14 May 2021.
  9. ^ "UK Finance Guide – Loans and finance news for the UK". Archived from the original on January 3, 2007.
  10. ^ "Aluminum-air batteries - game changer or hype?, Home". www.sparkanalytics.co. Archived from the original on 2021-12-13. Retrieved 2021-12-13.
  11. ^ "AlumaPower". AlumaPower.com. Retrieved 2023-06-12.
  12. ^ "Phinergy Marine, Home". Phinergy.com. Retrieved 2020-04-24.
  13. ^ "RiAlAiR, Home". rialair.com. Retrieved 2020-04-24.
[edit]